OmniSistem Das Light - Manual (Page 24)

- User manual - Manuel d’utilisateur - Manual del usuario -
24
Virtual scenes and virtual triggering
Scenes are always played in sequence so as to correspond to stand alone
mode. However, it is possible to play several (virtual) scenes simultaneously
with this software.
In Live, click on the Switch the virtual scene mode / normal mode button 3)
to activate virtual mode triggering and click on the required scene-button to
trigger it off as virtual, the scene-button will be displayed in blue. ALT + Click
can directly trigger off a scene-button in virtual mode.
Virtual scenes are played in HTP, so please pay special
attention to possible channel-contention and priorities.
A scene in Always loop will always loop in virtual mode.
The button of a virtual scene is displayed in blue.
Live scenes options
Right-click on a scene-button. Then, a menu appears:
• AUTO: the scene is played normally, by default.
• BPM: Audio analysis triggers scene-steps. Fade-time is not taken
into account and you can directly go on to the following step.
• BPM with fade: Audio analysis triggers scene-steps off depending
on BPM-calculating. Fade-time is taken into account and you can
directly go on to the following step.
• Auto release: By default the scene automatically releases the virtual
button after playing a number of loops.
• Stop on the last step, the virtual scene stops on the last step after
playing a number of loops.
• Always loop, the virtual scene keeps looping.
Now you know all about the software’s functions to create your own show.