OmniSistem Das Light - Manual (Page 21)

- User manual - Manuel d’utilisateur - Manual del usuario -
21
You can decide whether to activate an effect or not while editing it.
• If the effect is active while you are editing it, you assign channels some
values and the changes can be seen instantly, then its button is grey.
• If the effect is not active while you are editing it, channels are assigned
some values but states cannot be seen instantly, then its button is white.
Once you have created an effect, you can edit it or change its advanced
options without using the Live page buttons. Just use the direct keyboard
keys available in the software. An index may be consulted in the Tricks &
Tips section. You can also use the right click to display effect options. The
Invert state option inverts the button state.
You can play an unlimited number of effects simultaneously.
Some of them may be automatically de-activated if there is
another active effect on the same channel.
When editing an effect for the first time, its channels are on OFF.
If the effect is not active when edited, then its button is white. If
the effect is active when edited, then its button is grey.
Only channel-levels in HTP or LTP can be modified and saved
with the effect.
Keyboard shortcuts, presets and groups work in this mode.
Saving an effect
Click on the red button with a cross on it
to close the new cursor-window and save
the effect.
By pressing ESC on the keyboard, you
can also close and save your effect.
Deleting an effect
After clicking on Delete, a dialog-box prompts you to select an effect to be
deleted from the list of existing effects. Then you are prompted to confirm
deletion: it will be permanently deleted.