OmniSistem Das Light - Manual (Page 26)

- User manual - Manuel d’utilisateur - Manual del usuario -
26
• Insertion button 3), to move your scenes into 2).
• Delete button 3), to delete a scene from the window 2).
• Move the scene position 4), to change current scene position.
• Select the number of DMX channels 5) use in stand alone mode.
• Write in memory 6), to load interface memory.
• Empty memory 6).
• Test, to test memory stand alone mode.
• OK, to save and close the stand alone window.
In the window 2), playing order is respected.
After selecting your scenes, you can optimize memory-space. This step may
turn out to be essential if you wish to play long-running
scenes. Optimization
reduces memory-size and depends on the number of channels actually being
used. Choose Useful number of DMX channels in the scroll menu 5) the
nearest value that is higher than that of the latest channel used.
Once the memory has been optimized:
• Download your scenes from the right window into the Stand Alone
interface. Click on Write memory and wait for the confirmation
message.
• Disconnect stand alone interface from your computer.
• Plug in a 9 or 12-Volt DC power-supply.
• Move (down) power button to stand alone position.
• Select your scene by using the buttons on top of the box.
Your USB/DMX stand alone interface should be connected if you
wish to activate stand alone mode.
You can play scenes in sequence with the stand alone interface
and scene-order 2) is always respected.
A cycle in stand alone mode: scenes can loop and automatically
jump to the next one.
Stand alone mode requires a 9 or 12-volt DC power-supply.
External contacts in the stand alone interface
The stand alone interface can control 248 channels in direct sequence
access and can trigger off 8 scenes directly via its external connector.
When using a HE10 external
connector, you can plug in a simple
8-button remote control.
(Dispatching …)