Canon ImageCLASS D680 - Manual (Page 47)

4-10
4 Press Start.
• After the scanning is finished, the machine starts
to dial the number.
• The machine will first send the document to the
one-touch speed dialing destinations, then the
coded speed dialing destinations, and finally to the
destination dialed using regular dialing.
• If you prefer the machine never to scan a
document automatically after a few seconds,
disable the TIME OUT setting. (
→ p. 9-6)
• To cancel sending, press Stop/Reset then press
4 (–). Sending to all destinations specified in step
3 will be canceled. You cannot cancel just one
destination.
After canceling, the machine will print a MULTI
TX/RX REPORT. (
→ p. 7-4)
• If a number is busy, the machine will
continue sending to the other destinations
and then redial the number that was busy. NOTE