Canon ImageCLASS D680 User Manual

Page 82

Advertising
background image

9-7

3.DRPD:SELECT FAX

Select a ring pattern when the machine receives faxes.
(

→ p. 5-5)

NORMAL RING

Ring type of normal telephone line.

DOUBLE RING

Two short rings at regular intervals.

SHORT-SHORT-LONG

Short-short-long at regular intervals.

SHORT-LONG-SHORT

Short-long-short at regular intervals.

OTHER RING TYPE

Patterns other than those described above.

4.INCOMING RING

When the machine is set to FaxOnly and Fax/Tel, set
whether the machine rings when it receives a call.

OFF

The machine does not ring when it receives a fax. (In
energy saver mode, the fax may ring one or two times.)

ON

The machine rings when it receives a fax if the handset
or a telephone is connected.

RING COUNT

Sets the number of incoming rings before the machine
answers.
1

to 99 TIMES (2 TIMES)

5.MAN/AUTO SWITCH

Sets the machine to switch to document receive mode
after ringing for a specified length of time in the manual
receive mode.

OFF

The machine keeps ringing until someone answers the
call manually with the handset or a connected extension
telephone.

ON

F/T RING TIME

: Sets the length of time to elapse

before the machine switches to the document receiving.
5

to 99 SEC (15 SEC)

6.REMOTE RX

Receives from a remote telephone with preset setting.

ON

Remote receiving is turned on.

REMOTE RX ID

You can dial a number code on the remote extension to
start receiving a document.
A combination of two characters using 0 to 9,

A and #

(25) is possible.

OFF

Remote receiving is turned off.

PRINTER SETTINGS

Sets the print functions.

1.RX REDUCTION

Receives images at a reduced size.

ON

Turn on image reduction.

1.RX REDUCTION

AUTO SELECTION

: Reducing size is set to auto.

FIXED REDUCTION

: Reducing size is preset.

97%

, 95%, 90%, 75%

2.SELECT REDUCE DIR

VERTICAL ONLY

: Reduction is performed in the

vertical direction only.
HORIZ & VERTICAL

: Reduction is performed in the

horizontal and vertical direction.

OFF

Image reduction is turned off.

9

Setting the Additional Functions

Name

Descriptions

(The factory default setting is in bold face.)

Advertising