Canon ImageCLASS D680 - Manual (Page 65)

6-2
Switching Temporarily to Tone Dialing
Many information services for banks, airline reservations, hotel reservations, etc., require tone dialing for their
services. If your machine is connected to a rotary pulse line, follow this procedure to set the machine temporarily
for tone dialing:
1 Press FAX to set to Fax Mode.
Ex:
2 Pick up the handset of your telephone.
3 Enter a destination using the numeric keys
on your telephone or using a one-touch
speed dialing key, coded speed dialing
code, Redial/Pause key or the numeric keys
on the machine.
4 When the recorded message of the
information service answers, press
T
(Tone) to switch to tone dialing.
Ex:
• When
T (Tone) is pressed, T is displayed in the
LCD.
• If your telephone line uses tone dialing, go to the
next step.
5 Use the numeric keys on the machine to
enter the numbers requested by the
information service.
Ex:
• Numbers entered after pressing
T (Tone) will be
dialed using tone dialing.
• After pressing T (Tone), you cannot use the
numeric keys on the telephone. Use the numeric
keys on the machine.
6 If you want to receive faxes, press Start.
7 Hang up to disconnect the call.
• Tone dialing is canceled when you disconnect the
call.
T E L = T 3 4
T E L = T
F A X 1 2 / 0 3 / 2 0 0 1 1 5 : 3 0
F a x T e l S T A N D A R D