Pro Boat PRB2450 - Manual (Page 12)

12
After you have finished rigging the sails, it
will be helpful to trim the sails in order to
optimize the performance of your boat. It is
often necessary to briefly sail the Endeavor in
order to see how the sails need to be
trimmed. This section covers hints and tips
for trimming your Endeavor for the best
performance. Remember to take your time to
optimize your sailing pleasure.
 1. Check to make sure the main boom and
jib boom are in line with each other.
Adjust the jib stay at the top of the jib sail
to position the jib boom.
 2. With the radio system on, move the left
stick on your transmitter "up" and
manually push the main sail and jib sail
open. You should be able to open the sails
to at least a 60-degree angle. If you
cannot do this, it will be necessary to
adjust the length of the line (allowing
more slack) by adjusting the jib stays
located underneath the main sail and jib
sail booms. See Section 3 Step 3 for
rigging adjustment locations
Section 8 – Performance Tips