Rev-A-Shelf 448-Series User Manual

Rv-series, Pull-out waste containers and hampers, Installation instructions for

Advertising
background image

448 Series Pull-Out Wood Spice Rack Instruction Sheet

Instrucciónes para la Serie 448

Cajones de Madera con Compartimientos para Especias

Instructions Du bois De Support D’Épice De 448 Séries

1. Disengage Cabinet Slide Assembly from unit

by pressing release levers on the 2 vertical slides

and pulling unit away from Cabinet Slide

Assembly. (Fig 1)

2. Insert spice rack at angle as shown. (Fig. 2)

Note: Shelf may need to be adjusted lower to

allow spice rack and spices to clear opening of

cabinet.

1. Dégager I’ensemble de glissières de l’armoire

de la base coulissante en

appuy ant sur les leviers de dégagement

des deux glissières verticales et en retirant

la base de l’ensemble de glissières. (Fig. 1)

2. Inserte el ángulo del compartimiento de

especias como se indica. (Fig. 2) Nota:

El estante podrá necesitar un ajuste

más bajo para permitir que el compartimiento

de especias y las especias entren

adecuadamente en el gabinete.

1. Presione la palanca de desenganche en

cada una de las dos deslizaderas verticales

del armario para desarticular el ensamblaje

y sacarlo del armario. (Fig. 1)

2. Insèrez le support d’èpice à l’angle comme

montrè. Note: L’ètagère peut devoir être

abaissèe pour permettre le support et les

èpices à l’ouverture claire du coffret. (Fig. 2)

I-448SR

03/08

Fig. 2

Fig. 1

Installation Instructions for:

RV-Series

Pull-Out Waste Containers and Hampers

With the frame in a closed position, insert the front two

screws, making sure that the framework is square to the

front of the cabinet.

If there is suffi cient clearance, install rear screws.
If framework prevents access to rear screws, remove

framework by pulling out and lifting frame from slides.

Note: if your product features full extension slides

remove frame by disengaging release triggers (Fig. A).

Finally, place your waste container in the wire frame and the

installation is complete.

Your RV series has been shipped fully assembled for ease

of installation.

• First Remove the container(s) from the wire frame.

• Place the frame inside of your cabinet.

• Look to make sure that there is plenty of clearance to

shut the door and for the waste container.

I-RV-05

©2005 Rev•A•Shelf, Inc. • 2409 Plantside Drive • Jeffersontown, KY 40299 • 1-800-626-1126 • FAX 502-491-2215

If you have any questions or would like additional information

on the rest of our prod ucts for the kitchen, closet, or

bathroom, please contact a Customer Service Specialist at:

1-800-626-1126 or visit us on the web at www.rev-a-shelf.com.

Also, don't forget about our door mount kit (RV-DMKIT)

that will attach your current cabinet door to your RV Waste

Container or Hamper.

1

2

3

Advertising