Sceptre X32BV-NAGA - Manual (Page 13)

SCEPTRE X32 HDTV User Manual
- 13 -
www.SCEPTRE.com
Rear View Connections
The following descriptions are for connections from left to right.
1. SERVICE – This port is for factory service by Sceptre’s technicians only.
2. LINE OUT - This connection port is used for sending out digital audio signals
to digital surround sound receivers. The orange (COAXIAL SPDIF OUT)
connector sends out either bit-stream or PCM digital sound signal to a home
theater receiver with digital input.
3. AV1 – Composite connects to devices that use composite video cables such
as VCR or camcorder or video game consoles. The S-Video connector is
associated with AV1’s S-Video. Please connect the video portion with either
the yellow connector or the S-Video connector. Do NOT connect both video
connectors.
4. YPbPr1 – This connection port is for DVD players or satellite / cable set-top
boxes that use component cables. From left to right, connect green, blue,
and red for video, and then connect white for left channel audio, and red for
right channel audio.
5. YPbPr2 – This connection port is for DVD players or satellite / cable set-top
boxes that use component cables. From left to right, connect green, blue,
and red for video, and then connect white for left channel audio, and red for
right channel audio.