Sceptre X32BV-NAGA User Manual
Page 73
SCEPTRE X32 HDTV User Manual
- 73 -
www.SCEPTRE.com
PC – This function is for people who use the X32 LCD HDTV’s VGA port as a PC
monitor only. The function adjusts the position and syncs the signal of the PC.
1.
Press MENU to open the OSD and highlight SETUP by pressing the ▼ button.
2. Press
↵ or ► to select the functions and highlight DATE/TIME.
3. Press
▼ repeatedly until you select PC and press
↵.
4. Use
▲ or ▼ to select the subfunction you want and press
↵.
5.
AUTO ADJUST is a typical LCD monitor’s auto adjust function. It syncs to the
signal of the VGA card and auto adjusts the clock and phase of the signal so
your picture comes out clear and centered.
6.
AUTO COLOR calibrates the TV screen to display colors accurately.
7.
POSITION moves the picture left, right, up, or down.
8.
PHASE adjusts the video signal in a small increment to sync with the PC.
9.
CLOCK adjusts the video signal in a large increment to sync with the PC.
Please Note :
•
The X32 LCD HDTV’s best PC resolution is 1360x768 at 60hz.
•
Always try to use AUTO ADJUST over manual adjustments.
•
The VGA port of the TV features a power saving mode which will
automatically turn off the TV, if there’s no signal provided for more
than 5 minutes.