If you want the good connection with s-video – Sceptre X32BV-NAGA User Manual
Page 26
SCEPTRE X32 HDTV User Manual
- 26 -
www.SCEPTRE.com
If You Want the Good Connection with S-Video…
1.
Make sure the power of X32 LCD HDTV and your DVD player is turned off.
2.
Obtain an S-Video Cable. Connect the S-Video connector to both your DVD
player and AV’s S-Video connector port on the back of your X32 LCD HDTV.
3.
Obtain a RCA Audio Cable. Connect the white color connector to both your
DVD player and AV’s white connector port on the back of your X32 LCD
HDTV.
4.
Connect the red color connector to both your DVD player and AV’s red
connector port on the back of your X32 LCD HDTV.
5.
Turn on the X32 LCD HDTV and your DVD player.
6.
Use the remote control’s source button or the source button on the right side
of the TV to switch to S-Video.
Please Note :
•
Make sure the yellow connector in the same group is not connected.
You can only connect either the S-Video port or the Yellow Video
connector port. DO NOT CONNECT BOTH.
•
Please reference the DVD player’s manual as well, to make sure
the DVD player is configured to output correctly to the TV.