Sceptre X32BV-NAGA - Manual (Page 8)

SCEPTRE X32 HDTV User Manual
- 8 -
www.SCEPTRE.com
Attaching or Removing the Stand
1. Please handle the TV with two or more people. Please locate a large flat surface
(i.e. table) and put a soft cloth (i.e. blanket) on the surface. Please set the TV
facing up on the flat surface so the panel does not get damaged.
2.
Please connect the stand to the TV and secure the connection with a screw driver
and the 8 screws included in the accessory box.
3.
You can screw them in from the bottom of the stand. DO NOT over tighten the
screws when installing the stand; otherwise the stand’s threading will become
stripped. Please Note: To disassemble the TV stand, for wall mounting
purposes, please repeat the step 1, but unscrew the 8 screws to remove the
stand.