Sceptre X32BV-NAGA - Manual (Page 14)

SCEPTRE X32 HDTV User Manual
- 14 -
www.SCEPTRE.com
The following descriptions are for connections from left to right.
6. VGA - This connection port connects to a PC for video using VGA cable. Be
sure to connect your audio cable to the VGA Stereo input if you want sound
out of VGA video source.
7. VGA STEREO INPUT - This connection port is for people who want to
provide audio to the TV when using a PC or a DVI video device. The sources
use 3.5mm mini-jack audio cable.
8. HDMI1 – HDMI connects to devices that use HDMI cable, such as Blu-ray or
HD DVD player, or HD cable / satellite set-top box. This connection port
receives pure digital audio and high definition signal through one single cable.
This port also can accept a HDCP video device for video.
9. HDMI2 – HDMI connects to devices that use HDMI cable, such as Blu-ray or
HD DVD player, or HD cable / satellite set-top box. This connection port
receives pure digital audio and high definition signal through one single cable.
This port also can accept a HDCP video device for video.
10. TV – This connection is for digital or analog cable without the cable box or
over-the-airwave antennas. The tuner is a hybrid tuner that tunes to both
analog and digital channels. This connection uses coaxial RF cable. For
over-the airwave digital stations please check
http://www.antennaweb.org .
11. AC IN - This connection is for providing power to the TV.
Please Note:
•
This TV features a power saving function which will turn off the TV
automatically after 5 minutes of idling on a connection with no signal. This
feature is present on all connection.