Sceptre X32BV-NAGA User Manual
Page 62
Advertising
SCEPTRE X32 HDTV User Manual
- 62 -
www.SCEPTRE.com
5. SETUP CODE – This subfunction sets the password.
a. Press MENU to open the OSD and highlight FUNCTION by
pressing the ▼ button.
b. Press
↵ or ► to select the functions and highlight AUTO LOCK.
c. Press
↵ to select the function.
d. Press
▼ until you see SETUP CODE and use
↵ to select it.
e. Input
“0000” as your password and input your new password.
Please Note :
•
There is no way of resetting the password.
•
If you’re going to change the password, please write it
down and keep it in a safe place just in case you forget.
Advertising