SIG SAUER P290 - Manual (Page 27)

www.sigsauer.com 27
when it counts ™
Step 1
5.2 firing the Pistol
aim the pistol at a safe target
1. Place finger on the trigger and pull back to discharge.
2. Keep pistol aimed at the target and continue to fire as required or until
the pistol is empty.
3. remove the magazine, unload and clear the pistol (see section 6.0
“unloading the Pistol”). if the pistol is fired until the magazine is empty, the
slide will remain locked to the rear. if firing is to continue, reload the pistol
(see section 4.4 “reloading during Shooting”).