SIG SAUER P290 - Manual (Page 45)

www.sigsauer.com 45
when it counts ™
1. ensure the magazine is removed and the pistol is unloaded (see
section 6.0 “unloading the Pistol”)
2. check recoil spring function & slide travel
a. retract slide fully and release
b. Verify slide locks fully in the closed position
c. repeat the procedure
Step 2
Step 3a
3. check trigger mechanism
a. Pull trigger fully to the rear.
b. as the trigger is pulled rearward, verify the hammer cocks. at the end of
trigger travel, the hammer should fall forward firmly.
Step 3b