SIG SAUER P290 - Manual (Page 54)

54 www.sigsauer.com
8.7.4 integrated laser module
8.7.4.1 integrated laser module installation
1. remove the slide assembly (see Section 8.1 Pistol disassembly)
2. remove the laser plug from the frame.
3. Seat the integrated laser module against the frame and trigger guard.
ensure the laser key protrudes through the laser key hole in the frame.
4. using a small screwdriver, turn the laser key ¼ turn to the left until secure.
5. reassemble the pistol (see Section 8.4 Pistol reassembly)
8.7.4.2 integrated laser module Removal
1. remove the slide assembly (see Section 8.1 Pistol disassembly)
2. using a small screwdriver, turn the laser key ¼ turn to the right until
aligned with the frame laser key hole.
3. remove the integrated laser module from the pistol.
4. install the laser plug into the frame (not required for pistol function)
5. reassemble the pistol (see Section 8.4 Pistol reassembly)
Step 2
Step 4
Step 2