SIG SAUER P290 - Manual (Page 53)

www.sigsauer.com 53
when it counts ™
8.7.3 grip Panel Removal and installation
8.7.3.1 grip Panel Removal
1. remove the rear housing pin.
2. Slide the grip panel towards the bottom of the magazine well and remove.
8.7.3.2 grip Panel installation
1. align the grip panel with the corresponding dovetails on the frame.
2. Slide the grip panel towards the slide until fully seated. Verify the holes
for the rear housing pin are aligned.
3. install the rear housing pin.