Slant/Fin CHS-FS-40 - Manual (Page 5)

CHS 85-399 CHS Floor Stand Installation Instructions │ Slant Fin Corp.
5
8. Fasten the Boiler Support Bracket to the bottom
of the boiler using the screws removed in step 6.
Before tightening, ensure the boiler is plumb.

10. Check to ensure the boiler is level – correct if
necessary using Leveling Legs. Proceed with the
boiler installation
– see detailed Installation
Instruction provided with the boiler.

9. Secure the Boiler Support Bracket to the
Middle Cross Member using #14 x 3/4” drill-point
screws.
