StarTech.com SV1108IPPWEU - Manual (Page 16)

Instruction Manual
9
Rack Mounting
For convenience and flexibility, the SV1108IPEXT/POW can be mounted on a
system rack.
To rack mount the unit do the following:
1. Remove the two original screws from the top/bottom of the unit (near the rear of
the unit).
2. Using the screws provided with the rack mount kit, screw the mounting bracket into
the SV1108IPEXT/POW – as shown in the diagram below:
NOTE: The illustrations show the mounting bracket attached to the bottom of the unit;
it can also be attached to the top.
M3 x 8