StarTech.com SV1108IPPWEU - Manual (Page 176)

Instruction Manual
169
Problem Resolution
Video display problems with 13W3
interface systems (e.g., Sun Ultra
servers).*
The display resolution should be set to
1024 x 768:
Under Text Mode:
1. Go to OK mode and issue the
following commands: setenv output-
device screen:r1024x768x60 reset-all
Under XWindow:
1. Open a console and issue the
following command: m64config -res
1024x768x60
2. Log out
3. Log in
The local and remote mouse pointers
do not sync
The default configuration is for the
local and remote mouse pointers to
automatically sync when you connect.
Automatic mouse sync only supports
USB mice on Windows and Mac (G4 or
higher) systems, however. You must
select Manual as the Mouse DynaSync
Mode choice, and sync the
pointers manually.
NOTE: These solutions work for most common Sun VGA cards. If using them fails to
resolve the problem, consult the Sun VGA card’s manual.