StarTech.com SV1108IPPWEU - Manual (Page 50)

Instruction Manual
43
In order to configure the LDAP server, you will have to complete the following
procedures: 1) Install the Windows Server Support Tools; 2) Install the Active Directory
Schema Snap-in; and 3) Extend and Update the Active Directory Schema.
To allow authentication and authorization for the SV1108IPEXT/POW via LDAP / LDAPS,
refer to the information in the following table.
Item Action
Enable
Put a check in the Enable checkbox to
allow LDAP / LDAPS authentication and
authorization.
LDAP/LDAPS
Click a radio button to specify whether
to use LDAP or LDAPS.