StarTech.com SV1108IPPWEU - Manual (Page 67)

Instruction Manual
60
Setting Meaning
Enable Toggle DTR
Enabling this parameter allows the DTR
signal to toggle between disabled and
enabled when the port is occupied.
Choices are: No and Yes. Default is No.
NOTE: For some devices, in order for
Enabled to work correctly, you must
first disable DTR (select No, then click
Update), then Enable it (select Yes, then
click Update).
Online Detect
This allows you to set the DSR signal to
detect online status or not.
Choices are: None and DSR. Default
is DSR.
Out CRLF Translation
This allows you to select whether to
send a Carriage Return and
Line Feed signal (CRLF), or only a
Carriage Return signal (CR).
Choices are: None (which sends CRLF)
and CRLF CR (which
only sends CR), Default is None.
NOTE: If your device outputs double
spaced lines, it means that a line feed is
automatically added to a carriage return
signal. In that
case, choose CRLF CR.
Suspend Character
The Suspend character is used to bring
up the Suspend Menu in Telnet sessions
NOTE: Valid characters are from
A–Z, except H, I, J, and M. Those four
characters may not be used.