StarTech.com SV1108IPPWEU - Manual (Page 76)

Instruction Manual
69
Parameter Explanation
Reset
Some configuration changes only take effect after a
SV1108IPEXT/POW reset. These include changes on the
Network page; a Log Server port change; enabling/
disabling browser access; and upgrading the firmware.
For those changes, a check is automatically put in the
Reset on Exit box.
To have the changes take effect, log out and then
log back in again. A wait of approximately 30 to 60
seconds is necessary before logging in following
the reset.
NOTE: If the SV1108IPEXT/POW’s performance
degrades, reset it by putting a check in the Reset on
Exit box, and then log out / log in.
Date/Time
The Date/Time dialog page sets the SV1108IPEXT/POW time parameters: