Canon CDI-E075-010 - Manual (Page 108)

102
Image shot with the
1st-curtain setting Image shot with the
2nd-curtain setting.
Switching the Timing at which the Flash Fires
1st-curtain
The flash fires right after the shutter opens, regardless of the shutter speed. Usually,
the 1st-curtain is used when shooting.
2nd-curtain
The flash fires right before the shutter closes, regardless of the shutter speed.
Compared with the 1st-curtain, the flash fires later and this allows you to shoot
images in which, for example, a car’s rear lamps seem to trail off behind.
1 From the [ (Rec.)] menu, select [1st-curtain] or [2nd-curtain]
in [Flash Sync].
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Some settings are not available with certain Shooting modes. Please refer to
Functions Available in Each Shooting Mode (p. 208).