Canon CDI-E075-010 - Manual (Page 84)

78
Setting the Shutter Speed (continued)
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
• Functions Available in Each Shooting Mode (p. 208)
• Please note that camera shake becomes a factor at low shutter speeds. If the
camera shake warning appears in the center of the LCD monitor, secure the
camera to a tripod before shooting.
• The fastest shutter speed for flash synchronization is 1/250 second. The camera
automatically resets the shutter speed to 1/250 second if a faster speed is selected.
• The aperture value and shutter speed change according to the zoom state as
follows.
Aperture Shutter Speed (seconds)
Wide Angle
F 2.0 - 3.5 to 1/1250
F 4.0 - 8.0 to 1/2000
Telephoto
F 3.0 - 5.0 to 1/1250
F 5.6 - 8.0 to 1/2000
Shutter Speed Display
The shutter speeds from 2000 to 4 in the display panel are actually the
denominator of a fraction of a second. For example, 160 indicates a speed of
1/160 second. For slower speeds, quote marks indicate the decimal place, so that
0"3 indicates 0.3 second and 2" indicates 2 seconds.
2000 1600 1250 1000 800 640 500 400 320 250
200 160 125 100 80 60 50 40 30 25 20 15
13 10 8 6 5 4
0"3 0"4 0"5 0"6 0"8 1" 1"3 1"6 2" 2"5 3"2
4" 5" 6" 8" 10" 13" 15"
The display of shutter speeds from 1/4 to 1/2000 second differs between the
display panel and LCD monitor.
Shutter Speed 1/2000 sec. . . . 1/4 sec. . . . 0.8 sec. . . . 15 sec.
Display Panel . . . . . . . . .
LCD Monitor 1/2000 . . . 1/4 . . . 0"8 . . . 15"