Canon CDI-E075-010 - Manual (Page 116)

110
Using the ND Filter
The brightness can be decreased by setting the ND filter on. This allows you to select
a smaller aperture and a slower shutter speed than usual.
1 Press the button to turn on the LCD monitor.
2 Select [ND Filter] in the [ (Rec.)] menu.
See Selecting Menus and Settings (p. 42).
3
Select [On] and press the button.
appears on the Display Panel. also appears on the LCD monitor if it is on.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Always use a tripod to prevent camera shake in this mode.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
• Some settings are not available with certain Shooting modes. Please refer to
Functions Available in Each Shooting Mode (p. 208).
• Standard brightness is decreased to approximately 1/8 when the ND filter is on.
For example, if the appropriate aperture value is 5.6, it becomes 2 when the ND
filter is on.