Canon CDI-E075-010 - Manual (Page 160)

154
A video-compatible television connected via the supplied AV cable AVC-DC100 can
be used to view images as you shoot or replay them.
1
Turn off the camera (p. 29).
Also turn the television off.
2
Attach AV Cable AVC-DC100 to the
terminal on the camera.
3
Plug the other ends of the AV cable to
the video in and audio in jacks on the TV.
4 Turn on the TV and switch it to Video mode.
5
Turn the mode lever to or (p. 28, 29).
• The image will appear on the TV. Shoot or replay images as usual.
• If the images are not appearing on the TV when shooting, press the
button.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
• No image will appear on the LCD monitor when the camera is connected to a TV
monitor.
• The video output signal can be switched (NTSC or PAL) to accommodate different
regional standards (p. 165). The default setting will vary between regions.
NTSC: Japan, U.S.A., Canada, Taiwan, etc.
PAL:
Europe, Asia (excluding Taiwan), Oceania, etc.
If an incorrect video system is set, the output image will not display properly.
• If the TV is a stereo model, you can plug the audio plug into either the left or right
Audio In jack. Please refer to the TV´s manual for details.
• A TV monitor cannot be used in mode.
Viewing Images on a TV Set
To the
Video In Jack
To the
Audio In Jack
Yellow
Plug
Black
Plug