Preparing the camera, basic functions, Indicator – Canon CDI-E075-010 User Manual

Page 23

Advertising
background image

17

Preparing the Camera, Basic Functions

5

Connect the DC plug of the compact
power adapter to the camera’s DC IN
terminal.

• The indicator beside the viewfinder will blink

orange while the battery pack is charging and
change to steady orange when it is
approximately 90% charged, which is
adequate for use. If it is charged for
approximately 2 more hours, it will become
fully charged and the indicator will switch to
green.

• After charging the battery, remove it from the

camera when the camera will not be used.

• If the power is turned on while charging, the battery pack will stop charging and

the compact power adapter will power the camera.

• This is a lithium ion battery pack so there is no need to completely use or discharge

it before recharging. It can be recharged at any time. However, since the maximum
number of charge cycle is approximately 300 times (buttery life), you are
recommended to only charge the battery pack after having discharged it
completely to pro long battery life.

• It takes approximately 80 minutes to bring a fully discharged battery pack to a

charge state of approximately 90% (adequate charge for use). It takes
approximately 2 more hours to charge it fully (based on Canon´s testing standard).
Charging it within a temperature range of 5 to 40º C (41 to 104º F) is recommended.

• Charging times will vary according to the surrounding humidity and battery pack

charge state.

• You can also charge the battery pack using the separately sold Battery Charger

CG-570* or CB-5L.

* The Compact Power Adapter CA-560 (included with the camera) or the separately sold Compact

Power Adapter CA-570 is required. (The Compact Power Adapter CA-570 cannot be used to power
the camera from a household power source)

• Battery Pack BP-512 (optional) can also be used in this camera.

Battery Pack Handling Precautions
•Keep the battery pack and camera terminals (

) clean at all times. Dirty

terminals may cause a poor contact between the battery pack and camera. Polish the
terminals with a tissue or a dry cloth before charging or using the battery pack.

•Do not cover the compact power adapter with anything, such as a tablecloth, cushion

or blanket, when it is charging. Heat will build up internally and possibly lead to fire.

•Do not charge batteries other than Battery Pack BP-511 or Battery Pack BP-512

with the supplied equipment. It could damage the camera.

Indicator

Advertising