Canon CDI-E075-010 - Manual (Page 143)

137
Printing, T
ransferring
4
Connect the camera and printer using
the connection cable*.
When you insert the cable, make sure the
mark of the cable faces the front of the camera.
* Connection cables
• Interface Cable IFC-300PCU (included with the
camera)
• CP-100 and CP-10 printer: Direct Interface Cable
DIF-100 (included with the printer)
5 Press the printer’s ON/OFF button to turn
on the power.
• When the printer is properly connected to the
camera, it powers up, appears on the camera
LCD monitor and the power/mode indicator is lit
in green.
• With printers that do not have an ON/OFF button,
the power turns on when the power cord is
connected to the printer as shown in Step 2.
Connecting to a Bubble Jet Printer
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Please read the user guide supplied with your BJ printer to see if it is compatible with
the direct print function, and for instructions on connection cables and general
operations.
1
Turn off the camera (p. 29).
2
Turn the BJ printer´s power on after you have connected the
power cord to the BJ printer and inserted the other end in a
power outlet.
3 Open the LCD monitor.
DIGITAL Terminal
to
Printer