Gps nav mode (rs232 only) – TruTrak Vizion 380-385 Operation Manual User Manual

Page 23

Advertising
background image

 

Vizion  380/385  

23  

Rev  -­‐  Initial  

6.3.2. GPS  NAV  Mode  (RS232  Only)  

The  GPS  NAV  mode  allows  the  autopilot  to  follow  a  direct-­‐to  or  

multi-­‐leg   flight   plan   from   the   connected   handheld   or   non-­‐IFR   GPS.    
This  mode  uses  only  RS232  data  and  will  not  anticipate  any  turns  or  

fly  any  procedure  turns/approaches.    This  mode  is  accessed  from  the  
TRK  mode  by  pressing  the  MODE  button  on  the  autopilot.  

To  access  the  GPS  NAV  mode  from  TRK  mode,  press  the  MODE  

button.     Figure   6.3.2a   shows   the   transition   from   TRK   mode   to   GPS  
NAV
 mode.

 

 

Press  MODE  

 

Figure  6.3.2a  

Figure  6.3.2b  shows  the  autopilot  in  GPS  NAV  mode  and  SVS  

mode  (see  section  6.4.1  for  SVS  mode).  

 

Figure  6.3.2b  

Figure  6.3.2c  shows  the  autopilot  in  GPS  NAV  mode  and  ALT  

HOLD  mode  (see  section  6.4.2  for  ALT  HOLD  mode).  

 

Figure  6.3.2c  

Figure  6.3.2c  shows  the  autopilot  in  GPS  NAV  mode  and  SEL  

mode  (see  section  6.4.3  for  SEL  mode).  

 

Figure  6.3.2c  

Advertising