Vexilar FL-22 - Manual (Page 13)

13
additiOnal Features
Low Power Mode
( Not Available on FL-8SE )
Low Power Mode, or LP Mode, reduces the output power of your flasher. It is useful for
situations where the gain cannot be turned down enough in Normal Mode. Use the Low
Power Mode only when you need to. Usually, you’ll use it in only very shallow or very
weedy conditions.
FL-18
Activate the Low Power Mode (LP) by switching the Mode control to the
left. The range can be set at any position. If you switch to the left of LP,
you can activate the AZ or BL Modes in Low Power Mode.
FL-12 and FL-20
Activate the Low Power Mode by switching
the range control from OFF to the left. The
range will be set to 20 feet. You can use any
of the Mode settings in Low Power Mode.
FL-22
HD
Activate the Low Power Mode by switching
the mode control from to the left. The first
low power mode provides a normal view.
The AZ 6’ Low mode places the unit in the
split-screen AutoZoom mode at low output
power. (see page 13)
DID YOU KNOW ? Low Power Mode will not affect how much battery power is required
to run the flasher. Switching to Low Power Mode will not significantly increase your running
time on a battery.
DID YOU KNOW ? You can have a Low Power Mode feature on an FL-8se too by
purchasing a Vexilar S-Cable. Learn more about it on page 45.