Vexilar FL-22 User Manual
Page 25
25
Battery Compartment
To remove the battery, remove the four rear
section screws.
Transducer Holder
Store the transducer in the special holder
above the battery. The holder is designed to
accept all styles of Ice-Ducers.
Cable Storage
Stuff extra cable into the
storage compartment
under the flasher unit.
Eye-Bolt
Insert the transducer support eye-bolt
here. Be sure to remove the float from
the transducer cable when using the
eye-bolt, which is commonly used on
lakes with thin ice conditions.
Accessories
Use the pre-drilled
holes for Vexilar add-on
accessories, such as the
FlexLight, Battery Status
Indicator and Tri-Beam
Transducer Switch.
See page 42.
Easy Charge
Jack
Charge the
battery here.
You do not need
to disconnect
the battery
connections
while charging