Vexilar 107 Pro - Manual (Page 17)

Example 3 - To set the alarm to sound whenever the
depth gets less than five feet or more than fifteen feet, press
the 4 button to enter the upper alarm limit. Press the 1 but-
ton and then the 5 button to enter the value of fifteen. Press
the SET button to enter this value. If you make a mistake
entering the value, press the CLR button and then retry.
Now, press the 5 button to set the lower alarm limit. Press
the 5 button, and then, the SET button to enter the value of
five. Then, press FREEZE/RESUME.
Example 4 - To set the alarm to sound whenever the
depth gets more than fifteen feet, press the 4 button to enter
the upper alarm limit. Press the 1 button, and then, the 5
button to enter the value of fifteen. Press the SET button to
enter this value. If you make a mistake entering the value,
press the CLR button and then retry. Now, press the 5 but-
ton to set the lower alarm limit. Press the 0 button, and
then, the SET button to enter the value of zero. Then, press
FREEZE/RESUME.
FISH ALARM
Press MENU, then, the 4 button, to enter the Fish Alarm
submenu. There are two sensitivity settings for the Fish
Alarm. Press 2 to activate the alarm and set the sensitivity
to High or 3 to set it to Low sensitivity. When set to High,
the alarm will sound on all fish targets. When set to Low,
it will only sound on larger fish targets. Set the Upper and
Lower limits the same way as described in the Bottom
Alarm section.
17