Vexilar LC-507 - Manual (Page 15)

15
MENU FUNCTIONS
To enter the menu, press the MENU button. You will now be on
menu page 1. Press the MENU button again to get to page 2. Press
it a third time to get to page 3, the final menu page. To exit the menu,
press the MENU button a forth time. Or, press any of the sonar con-
trol buttons (C-Line, Gain, or Range).
To navigate in the menu, press the UP or DOWN arrows (CON-
TRAST) to change lines and the LEFT and RIGHT arrows (MODE)
to change the item.
MENU 1
THE BACK-LIGHT
The Back-light will illuminate the display in low light conditions.
There are three levels of brightness. To turn on or adjust the Back-
light, press the menu button once. The Back-light item is the only
one on this page. Press the left or right arrow to change the setting.
You can choose from OFF, DARK, MEDIUM, and BRIGHT.
Note - If you are using the LC-507 with a small portable battery,
use the Back-light sparingly. It increases the current draw of the unit,
reducing your running time on the battery.
MENU 2
Within Menu page 2 are two boxes which contain the selection
items for each side of the display ,Right and Left. This page will
effect only on the currently selected mode. To change these settings
for a different mode, exit the menu, change to the desired mode,
then re-enter the Menu to make your changes.
RIGHT
This item determines the frequency of the Right, or full screen,
display. Use the left and right arrows to change the frequency
between 107 kHz and 400 kHz.