Vexilar LC-507 - Manual (Page 26)

26
Turn the LC-507 on and change the mode to number 1, if neces-
sary. The mode number is displayed at the far lower right corner of
the screen. Now, press the menu button. The first menu page will
appear. Press the Menu button again to get to the second page. The
darkened box indicates the item you are currently adjusting. The
activated selection will be indicated by an open box around it. Modify
the settings to match the following.
RIGHT: 107 400
SWEEP: S · · · F SF
A-RNG-MODE: 1ST 2ND 3RD
A-GAIN-LEVEL: L · M · H
A-MODE: OFF ON
FISH-ALARM: OFF ON
LEFT: 107 400 N/A
SWEEP: S · · · F SF
A-RNG-MODE: 1ST 2ND 3RD
A-GAIN-LEVEL: L · M · H
A-MODE: OFF ON
HARD-BTM-ALM: OFF ON
Now, press the Menu button two more times to exit. Change to
Mode 2 and then go back to Menu page 2.
RIGHT: 107 400
SWEEP: S · · · F SF
A-RNG-MODE: 1ST 2ND 3RD
A-GAIN-LEVEL: L M H
A-MODE: OFF ON
FISH-ALARM: OFF ON
LEFT: 107 400 N/A
SWEEP: S · · · F SF
A-RNG-MODE: 1ST 2ND 3RD
A-GAIN-LEVEL: L M H
A-MODE: OFF ON
HARD-BTM-ALM: OFF ON
For now, make sure
that the Automatic
Range and Automatic
Gain Controls are
activated on all three
Modes. Also, once on
the water, you will
need to adjust the
Clean Line for each
Mode.
Remember,
when using the
Hard Bottom
Alarm the A-
R N G - M O D E
feature must be
set to 2ND or
3RD.