Front axle lubrication (mfd), Service specifications, Front axle oil level – Cub Cadet 7532 User Manual

Page 110

Advertising
background image

LUBRICATION/FILTERS/FRUIDS

102

FRONT AXLE LUBRICATION (MFD)

Service Specifications

Oil Change Interval

Every 200 hours (See NOTE)

Oil

Capacity

4.0

Liters

(4.2

Quarts)

Oil

Type

SAE

85W-140

Gear

Lubricant

NOTE: Change the oil after the first 50 hours of operation and then every
200 hours of operation.

Front Axle Oil Level

To check the front axle oil level, put
the tractor on level ground. Remove
the oil level plugs located on the rear
of the both gear cases. If the oil level
is low, add the recommended oil type
through the fill hole located on the RH
side of axle housing until the oil
begins to flow out of the level plug
holes.

OIL LEVEL PLUG

DRAIN PLUG

Advertising