Cub Cadet 7532 - Manual (Page 50)

OPERATING INSTRUCTION
STOPPING THE ENGINE
IMPORTANT: When stopping the engine after operating under heavy load,
run the engine at 1500 RPM for a short period of time. This will allow the
engine temperature to decrease gradually.
42
STEP 1
Move the engine speed control
lever to run engine at idle speed
for three to five minutes to decrease
the temperature of engine.
STEP 2
Put the REAR PTO control lever,
MID PTO control lever and the
range shift lever in the OFF or N
(neutral) position.
STEP 3
Turn the key switch to OFF position.
Remove the key.
STOP STOP STOP
OFF
REAR
PTO
PTO
REVER
REAR
PTO
REVER