Cub Cadet 7532 - Manual (Page 25)

SPECIFICATIONS
Hydraulic System
17
Front Mounted, Engine Driven,
Pressure Loading Gear Type Hydraulic Pump Type
Capacity
Pump for Three Point Hitch
Pump for Power Steering
27.2 l/min (7.2GPM)
at 2500 Engine RPM
12.3 l/min (3.3GPM)
at 2500 Engine RPM
Maximum System Pressure 15200kPa (2204PSI)
Auxiliary Connector Front Hydraulic Block
Connector Size 9.5mm (3/8 inch)
Rear Power Takeoff (PTO)
PTO Type
Gear Drive Independent PTO
Hydrostatic Drive Live PTO
Location
Rotation
Shaft Size
Speed
At the rear of transmission
Clockwise from rear of tractor
34.9 mm (1.375 Inch) Diameter, 6Splines
540 RPM at 2376 Engine RPM
Mid Power Takeoff (PTO) OPTION
PTO Type
Gear Drive
Independent PTO
Hydrostatic Drive Live PTO
Location
Rotation
Shaft Size
Speed
At the Bottom of Transmission
Clockwise from Rear of Tractor
25.4mm (1 Inch) Diameter, 15Splines
2000 RPM at 2632 Engine RPM
Drawbar
Type
Distance from Hitch Hole to the End of PTO Shaft
Maximum Vertical Load on Drawbar
Fixed Type
358mm (14.092 inch)
440Kgf (969Lb)