Chaparral FS2620R User Manual
Page 43
Advertising
Changing Router Configuration
3-13
!
Link speed—You should set the FC channel link speed to match your FC speed. You
can set the speed to: 1GB, 2 GB, or AUTO. AUTO attempts to determine the speed of
the link/loop and configures the FC chip appropriately.
To configure an FC host channel:
1
From the System Menu, select Configuration Menu and press Enter.
The Configuration Menu screen displays.
2
Select Host Configuration and press Enter.
The Channel screen displays.
Note: When using an EC-enabled router, the router LUN must be visible
to perform Extended Copy in some software applications.
Advertising