Winco Mfg. 6240 - Inverness 24 Hour Treatment Recliner - Manual (Page 11)

Copyright 2014, WINCO MFG., LLC 11
SIDE-TABLE OPERATION:
1. TO RAISE TABLE: Grasp center of table and gently lift into place.
Side-table will lock into place with an audible "click" once fully extend-
ed.
WARNING:
•
DO NOT lean or sit on side tables.
• DO NOT use table for support or assistance when exiting or enter-
ing the chair.
• Keep hands and objects clear of the moving parts of the table
mechanism.
IMPORTANT:
•
Side-tables have been rated for a MAXIMUM weight capacity of
20 lbs. (9.0 kg)
2. TO STORE: Lift up on the lever located under the side-table and lower
to its stored position.
WARNING:
•
Keep hands and objects clear of the moving parts of the table
mechanism.
2
1
ATTENDANT OPERATING INSTRUCTIONS
TRANSFER OF OCCUPANT TO CHAIR:
Attendant should be positioned on the RIGHT or LEFT side of chair
1. Lock all four casters.
2. Place chair into seated or reclined position relative to the position from
which occupant is being transferred. (See pg.8)
3. Unlatch one swing-arm and place it into the 180° position.
4. Position gurney or wheel chair next to the chair on the side with the
open swing-arm.
5. Transfer patient to chair following facility safe patient handling policies.
6. Close the swing-arm.
WARNING:
•
Do NOT leave swing-arm open after occupant is transferred to
chair.
• When closing swing-arm, make sure occupants extremities are
clear of swing-arm travel and latch.
• When closing swing-arm, make sure any foreign objects are clear
of swing-arm travel and latch.
3
2