YSI IQ SensorNet FDO Sensor - Manual (Page 45)

FDO
®
70x IQ ... Indexes
ba76014e03 05/2014 9 - 3
9.1.2 Info messages
Message code Message text
IC133x Sensor has been successfully calibrated
* For calibration data, see calibration history
IC333x Factory calibration has been activated. Make sure the sensor operates
correctly.
IC433x Last valid calibration has been activated. Make sure the sensor oper-
ates correctly.
IC533x Invalid user calibration has been replaced by last valid user calibration.
Caution! Wrong measured values possible. Carry out a new successful
calibration to make sure the sensor operates correctly.es correctly.
IC633x The invalid user calibration was replaced by the factory calibration.
Caution! Wrong measured values possible. Check whether the sensor
operates correctly or carry out a new successful calibration.user cali-
bration.
IC733x This message displays the result of the last check (see section
4.2.2)
IS133x This message displays the information stored in the sensor cap
(see section
1.2)