Sears KENMORE 385. 1254180 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
SECTION 2. PREPARE YOUR MACHINE FOR SEWING
Prepare the Bobbin
a To Remove the Bobbin Case from the Machine
the machine bv pulling it to the
left. Open the shuttle cover by
pulling down the embossed part on
the left Side of the cover.
Raise needle to its highest position
by rotating hand wheel toward you.
0
Wind the Bobbin
Release
clutch
by
turning
the
clutch knob inside the handwheel
toward you.
tie, pull open letch of bobbin case.
Pull bobbin case straight out of
shuttle.
13
Advertising
This manual is related to the following products: