Sears KENMORE 385. 1254180 User Manual
Page 23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
![background image](/manuals/718031/23/background.png)
Stitch Length Control
Adjusting Stretch Stitch
Balance
SECTION 2. PREPARE YOUR MACHINE FOR SEWING
Reverse Stitch Control
length ot the stitch.
The higher the number, the shorter the
stitch.
0 means no feed.
Control should be ¡n the detent posi
tion batvyeen S and L f v position) for
most materials. Depending upon the
type of fabric used, you may need to
adjust this control to match forward
stitches of stretch sewmg with reverse
motion stitches. To shorten stretch
stitches, turn the control slightly to
ward
"L"
'S", To lengthen, turn toward
tro! during sewing.
Release to saw forward again.
Smocking stretch
C
Ricfcrack streich
21