Sears KENMORE 385. 1254180 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
SECTION 2. PREPARE YOUR MACHINE FOR SEWING
Pick Up Your Bobbin Thread
6.
Pull the thread to the left and slip
it through the thread guide.
7.
Thread then is slipped into needle
bar thread guide.
8.
Thread needle from front to back.
NOTE:
You may want to cut the
end of the thread with sharp
scissors for easier needle
threading.
3.
Are 3 to 4 inches of thread coming from the bobbin?
4.
Is thread from bobbin tangled?
5.
Is bobbin properly installed in the bobbin case?
6.
Is the machine threaded according to the instructions?
17
Advertising
This manual is related to the following products: