Sears KENMORE 385. 1254180 - Manual (Page 8)

SECTION 2. PREPARE- YOUR MACHINE FOR SEWING
Set Up the Madne (Continued)
Screw thread spool pins in place securely
with a screw driver.
Position spool pin feits as shown in illustra­
tion.
For winding the bobbin while your machine
IS threaded, you can use an extra spool pin
withoutunthreading themacine.
your presser foot.
You can raise it about 1/4" higher for easy
removal of the presser foot or to help you
place heavy fabrics under the presser foot.