Sears KENMORE 385. 1254180 User Manual
Page 49
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION -5. CARE TOR YOUR MACHINE
Replace the Light Bulb
Cleaning the Machine
1.
Unpiug the machine and open the
face cover.
CAUTION! The light bulb will be
HOT.
Protect your
fingers
when
you
handle it,
2.
Push the bulb up and turn the
buib counter-clockwise to remove
It.
3.
Put the new buib in by pushing it
up and turning it cfockwise.
To insure that your machine operates at its best, you need to keep The essential parts clean at all times.
The feed dogs and shuttle race areas can attract dust and lint. Your machine can become sluggish or knock loudly if a thread
IS caught.
Check and clean those areas about every three months under normal use.
If you sew frequently, clean more often.
iSIOTEi Unplug machine befor cleaning.
e Clean the Teed Dogs
1,
Using a screw driver, remove 2. Use a lint brush and clean the feed 3. Replace needle plate.
needle plats.
dogs.
47