Sears KENMORE 385. 1254180 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
![background image](/manuals/718031/16/background.png)
SECTION 2. PREPARE YOUR MACHINE FOR SEWiNG
Prepare the Bobbin iContinued)
o Wind the Bobbin (Continued)
Draw thread from spool through bobbin
winder tension disc as shown.
Pull end of thread
bobbin as shown.
through
hole
in
Place
bobbin
onto
bobbin
winder
spindle with end of thread coming from
the top of the bobbin. Push bobbin
winder shaft to the right until it clicks.
Holding onto end of thread, start ma
chine. When bobbin is slightly filled,
snip off end of thread.
Wind thread until winder stops. Remove
bobbin. Clip thread.
Tighten clutch knob.
14
Advertising
This manual is related to the following products: