SINGER W2135 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
---
VLkCmG BOBBIN C.\SE IN SHUTTLE
Open hinged cover plate lefi; oi the needle.
(See 12, Fig. 1) Hold the bobbin case latch, (D),
Fig. 9, between the thumb and forefinger of the left
hand,
with
at
least
three
inches
of
thread
running
from the top of the bobbin case to the right. Insert
and center the bobbin case on the stud of the shuttle
body,
(C).
Be
sure
the
bobbin
case
finger,
(E),
is
op
posite
the
shuttle
race
notch,
(A).
Press
the
bobbin
case
(B)
into
the
shuttle as far as pos
sible
until
latch
catches
on
the
center
post
of
the
Fig. 9
shuttle.
THEN release the bobbin case latch, (D).-
Press bobbin case again after latch has been re
leased to make sure the bobbin case is locked
securely in place. Close the cover plate.
wk
,
d
ci
,4
oj
:
<
n
|
yis;
„--iti-;■; -