SINGER W2135 User Manual

Page 11

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

UPPER THREADING

{Fig. 10)

1) Place spool of thread on upper spool pin,

2) lead thread through arm thread guide A

3) down and around tension discs B from right to

left

4) into the check spring C over threaded discs

5) then pull thread under bar D (See insert, Fig

1 0

)

6) up into take-up lever E from right to left

7) down into thread guide F on face plate

8) through the needle bar thread guide G

Fig. 11

9)

and into needle from left to right. Pull three or four inches of thread through needle

Hold

the

end

of

upper

thread

loosely

and

turn

hand

wheel

toward

you

until

the

needle

goes all the way down and comes back up. A loop (Fig. 11) will be formed over the upper
thread which then can be pulled out straight. Place both thread ends under the slot of the
presser foot and draw toward the back of the machine, leaving both threads three or four

inches long.

I

■ -

"jx* , .»S' -

Jk

Advertising